How to Clean a Firearm’S Magazine Body?

To clean a firearm’s magazine body, disassemble the magazine, wipe it down with a clean cloth, and use a degreaser to remove any residue or buildup. It is important to ensure that the magazine is completely dry before reassembling and using it again.

Cleaning your firearm regularly is an important aspect of firearm maintenance, and neglecting this can lead to malfunctions and potential safety hazards. While cleaning the barrel and frame of a firearm is often more emphasized, it is equally important to keep the magazine in working order.

The magazine is responsible for feeding ammunition into the chamber, making it an important component in the safe operation of any firearm. By following the steps above, you can ensure that your firearm’s magazine stays clean and functional for years to come.

How to Clean a Firearm'S Magazine Body?

Credit: ndzperformance.com

Understanding Your Firearm Magazine Body

When it comes to cleaning your firearm, the magazine body is often overlooked. However, it is a crucial part of your firearm’s operation, and proper maintenance ensures that your firearm operates safely and efficiently. In this guide, we will cover the different types of firearm magazine bodies and how they function, materials commonly used in magazine bodies, and how dirt and debris build-up affects magazine performance.

Different Types Of Firearm Magazine Bodies And How They Function

Firearm magazines come in various shapes, sizes, and capacities. Still, they all have two critical components: the outer shell, or body, and the inner components that hold the cartridges or rounds. Here are the most common types of magazine bodies:

  • Single-stack magazine body: The rounds are arranged in a single column in the magazine body. These magazines tend to be slimmer and more ergonomic.
  • Double-stack magazine body: The cartridges are stacked in two columns in the magazine body, which increases the magazine capacity. These magazines are typically broader than single-stack magazines.
  • Drum magazine body: These magazines are shaped like a drum and can hold a high number of rounds. They are commonly used in shotguns and submachine guns.

Materials Commonly Used In Magazine Bodies

Magazine bodies are made from various materials, including metal, polymer, and a combination of both. Here are the common types of materials used:

  • Stainless steel: This material is strong, durable, and resistant to corrosion. It is commonly used in high-end magazines.
  • Aluminum: This material is lightweight and durable. It is commonly used in pistol magazines.
  • Polymer: Magazines made from polymer are lightweight, durable, and cost-effective. They are commonly used in rifles and pistols.

How Dirt And Debris Build-Up Affects Magazine Performance

Magazines are vital components of firearms, and any issues with them can cause malfunctions, misfires, or stoppages. Dirt and debris build-up in the magazine body can affect its performance. Here are the effects:

  • Failure to feed: Dirt and debris inside the magazine can prevent the cartridges from moving smoothly, causing them to jam.
  • Follower drag: The follower is the component that pushes the cartridges upwards. Dirt and debris build-up on the follower can cause it to stick or bind.
  • Reduced capacity: Dirt and debris build-up in the magazine can reduce its capacity and cause it to malfunction.

It is essential to keep your magazine body clean to ensure that your firearm operates efficiently and safely. Use a cleaning solution and a brush to clean the magazine body thoroughly. Once it’s dry, apply a light coat of oil to protect it from rust and corrosion.

Understanding your firearm’s magazine body is vital for maintaining your firearm’s safety and efficiency. Ensure to keep your magazine body clean, identify the different types of magazine bodies and how they function, and the common materials used in magazine bodies.

Proper maintenance of a magazine body increases its lifespan and the overall operation of your firearm.

Pre-Cleaning Preparations

How To Clean A Firearm’S Magazine Body: Pre-Cleaning Preparations

Cleaning a firearm’s magazine body is just as important as cleaning the gun itself. A dirty or malfunctioning magazine can result in feeding issues and can also affect the performance of the firearm. Before starting to clean a magazine, it’s essential to observe certain safety measures.

In this section of the blog post, we’ll discuss what those measures are, the required tools and equipment, and how to disassemble the magazine.

Safety Measures To Observe Before Cleaning A Firearm Magazine Body

Firearms are inherently dangerous, and safety should always be a top priority, even during routine cleaning. Before starting the cleaning process, ensure that the following measures are observed:

  • Unload the firearm and remove the magazine from the gun entirely.
  • Check that the firearm is unloaded again before proceeding with the cleaning.
  • Choose a well-ventilated workspace, preferably outdoors.
  • Don’t consume alcohol or any other intoxicants before or during the cleaning process.
  • Wear protective gloves and eyewear to avoid contact with any leftover oils or solvents.

Required Tools And Equipment

To clean a firearm’s magazine body, you will need the following tools and equipment:

  • Clean cloth or rag
  • Cleaning solvent
  • Cleaning brush (toothbrush works well)
  • Lubricating oil
  • Punch (or any small, pointed instrument to aid in disassembling the magazine)
  • Magazine spring compression tool (optional but useful)

Disassembling The Magazine

Before starting to clean the magazine, you need to disassemble it properly. This is how you can do it:

  • Point the magazine in a safe direction and use a punch to remove the baseplate from the magazine body. Be careful not to lose any of the parts, particularly the spring.
  • Once the baseplate is removed, pull the spring out and set it aside. It’s recommended to place the spring in a separate container to avoid losing any parts.
  • Inspect the magazine body for any dirt, debris or fouling. Use a clean cloth or rag to wipe off any dirt.
  • Dip your cleaning brush into the solvent and clean the inside of the magazine body thoroughly. Make sure you get every nook and cranny.
  • Dry the magazine body thoroughly and apply a small amount of lubricating oil to the inside of the magazine body.
  • Reassemble the magazine by reversing the disassembly process. Place the spring first, followed by the follower and then the baseplate. Ensure that the magazine spring is correctly oriented and seated in the follower.

Cleaning a firearm’s magazine body is a vital process that should never be overlooked. By observing safety measures, having the required tools and equipment, and following the disassembly process, you can ensure that your firearm’s magazine body functions optimally.


Cleaning The Magazine

How to clean a firearm’s magazine body – cleaning the magazine

A clean and well-maintained firearm is more reliable and safer to use. However, some gun owners neglect an essential part of their firearm maintenance – cleaning the magazine body. Dirt, debris, and grime can accumulate inside the magazine, causing feeding problems and even malfunctions.

In this section, we’ll discuss how to effectively clean your magazine to ensure your firearm’s optimal performance.

Step-By-Step Guide To Cleaning The Magazine Body

Cleaning the magazine body sounds intimidating, but it’s a simple process that won’t take up much of your time. Follow these easy steps:

  • Unload the firearm and make sure there is no ammunition in the magazine.
  • Disassemble the magazine. Magazines usually have a baseplate that can be removed to separate the spring, follower, and mag body.
  • Inspect the magazine components for dirt, debris or corrosion. Any parts that need cleaning should be set aside for later.
  • Use a smaller cleaning brush to scrub dirt, debris, and buildup from the magazine body. Pay special attention to hard-to-reach areas such as corners and the feed lips.
  • Use a cleaning solvent to remove any remaining dirt and buildup and let the magazine components soak in the solvent for a bit.
  • After soaking, use a clean cloth or brush to wipe and remove any remaining debris and solvent.
  • Reassemble the magazine, making sure everything is properly seated and reinsert it into the firearm.

Effectively Removing Dirt And Debris From The Magazine Components

Cleaning the magazine body isn’t enough. Dirt and debris can also accumulate on the magazine components. Here are a few tips to effectively remove dirt and debris from each of the magazine parts:

The Mag Body

  • Use a small cleaning brush with solvent to scrub the mag body. Pay special attention to the feed lips and any other hard-to-reach areas.

The Follower

  • Use a small brush to remove dirt and buildup from the follower surface.
  • Use a dry cloth or a clean brush to remove any remaining dirt and debris from the follower.

The Spring

  • Use a clean, dry cloth to remove dirt, debris, and oil from the spring.
  • Conduct a visual inspection to make sure there is no rust or corrosion damage to the spring.

Specific Cleaning Techniques For Different Types Of Magazines

Different types of magazines may require different cleaning techniques to ensure their optimal performance. Here are some tips to keep in mind:

Polymer And Steel Mags

For polymer magazines, use a mild detergent and warm water to clean. A soft scrub brush and cloth will help remove grit and dirt. Steel mags can be cleaned in the same way or by using a solvent such as break-free or clp.

Rimfire Magazines

Rimfire magazines require an extra degree of care as they are often loaded with wax lubricated. 22lr rounds. To clean them, gently wipe the inside of the magazine body with a solvent-soaked patch followed by dry patches.

Top-Loading Magazines

To clean top-loading magazines, begin by disassembling the magazine and shaking out all loose debris. Use a small brush to clean dirt and debris from inside the magazine.

With these tips in mind, you can keep your firearm’s magazine body clean and prevent malfunctions due to dirt buildup. Remember to always inspect and clean your magazine regularly, and it will serve you well.

Drying And Reassembling The Magazine

Importance Of Drying The Magazine Body And Components

After cleaning the magazine body and components thoroughly, it is important to dry them properly. Here are some key points to keep in mind:

  • Use a clean, dry cloth or paper towel to remove any moisture from the magazine body and components
  • Ensure that all crevices and corners of the magazine body and components are dried
  • Moisture can cause rust and corrosion, so make sure that they are completely dry before reassembling

Correct Reassembly Of The Magazine Body

The magazine body is made up of several components that need to be reassembled correctly to ensure proper functionality. Follow these steps:

  • Take the spring and insert it into the magazine body
  • Place the follower on top of the spring
  • Hold the follower down and insert the floor plate onto the magazine body
  • Make sure that all components are aligned properly
  • Use a flat tool to push the tab into the slot to secure the floor plate

Double-Checking The Functionality Of The Reassembled Magazine

Once you have reassembled the magazine body, it is important to ensure that it is functioning properly. Here are some things you can do to check for functionality:

  • Load the magazine with the required number of rounds
  • Check that the rounds move freely within the magazine
  • Ensure that the spring is compressing and releasing properly
  • Verify that the follower is moving up and down smoothly
  • Insert the magazine into the firearm and check that it locks in place

By following these steps, you can ensure that your firearm’s magazine body is clean, dry, and assembled correctly, ensuring smooth functionality for optimal performance.

Proper Storage Of The Cleaned Magazine

Proper storage of your cleaned magazine is crucial in maintaining its functionality and reliability. Follow these storage tips to ensure your cleaned magazine won’t gather any dirt or debris:

  • Store the magazine in a dry and clean place, away from any moisture and direct sunlight.
  • Use a hard-sided case or a soft pouch to protect the magazine from external elements.
  • Avoid stacking magazines on top of each other as this may create pressure and deform the magazine’s shape.
  • Label your magazines so you can easily identify them.

How To Avoid Dust And Debris Buildup In Stored Magazines

Dust and debris can accumulate in stored magazines, causing malfunctions and affecting your firearm’s performance. Take these preventive measures to avoid dust and debris buildup in your stored magazines:

  • Use a clean and dry storage environment with good air circulation to prevent moisture buildup.
  • Place your magazines in a sealed plastic bag or wrap them in plastic wrap to reduce dust accumulation.
  • Routinely inspect your magazines for any signs of dirt or debris and promptly clean them as required.

Frequency Of Cleaning Firearm Magazines

How often you clean your firearm magazine depends on how frequently you use it. If you use your firearm regularly, you should clean your magazine after every use. If you use your firearm less often, you can clean your magazine every few months.

Here are some pointers to help you decide when to clean your magazine:

  • Inspect your magazine for any visible signs of dirt or debris.
  • Listen for any irregular sounds when firing, e.g., jams or misfeeds, which may indicate that your magazine needs cleaning.
  • Consider your firearm usage and safe storage. Unused or stored firearms pose a higher risk of rust and corrosion, which means you should ensure you clean them more frequently.

By following these tips for proper storage, preventive measures to avoid buildup, and a regular cleaning schedule, you can maintain your firearm magazine’s optimal performance.

Frequently Asked Questions For How To Clean A Firearm’S Magazine Body?

How Often Should I Clean My Magazine Body?

It is recommended to clean the magazine body after every use or every six months if the magazine is not in use regularly. Cleaning prevents dirt, dust, and debris buildup, which may cause feeding problems.

What Is The Best Way To Clean A Magazine Body?

First, disassemble the magazine and remove the spring and follower. Clean the body with a brush and solvent to remove fouling. Dry the magazine body, then lubricate it sparingly with oil or grease.

Can I Use Water To Clean My Magazine Body?

It’s not recommended to use water to clean the magazine body because it can cause rust and corrosion. Instead, use a solvent and a cleaning brush to remove fouling.

Should I Oil My Magazine Body After Cleaning It?

Yes, it is recommended to oil the magazine body after cleaning it. Only use a small amount of oil to lubricate the inside of the magazine body.

What Should I Do If The Magazine Body Is Damaged?

If the magazine body is damaged, it should be replaced. A damaged magazine body can cause feeding problems and can be unsafe to use. It’s better to replace it with a new one.

Conclusion

Keeping your firearm’s magazine body clean and properly functioning is crucial to ensure safety and accuracy. Neglecting even the smallest parts of your firearm can cause malfunctions that may lead to serious injury or even death. In this blog post, we have discussed the step-by-step process of cleaning a magazine body.

Remember to disassemble your magazine body carefully, clean all parts thoroughly, and lubricate where necessary. Always refer to your manufacturer’s guidelines when cleaning your firearm and never forget to wear protective gear. Regular maintenance is key to ensure the longevity and optimal performance of your firearm.

By following these simple steps, you can keep your magazine body in top condition and be confident in your firearm’s reliability and safety. Stay safe and happy shooting!


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *