How to Clean a Firearm’S Magazine Spring?

To clean a firearm’s magazine spring, begin by disassembling the magazine and removing the spring. Soak the spring in a degreaser solution, then scrub it with a cleaning brush and dry thoroughly with a clean cloth.

Cleaning your firearm magazine’s spring is an essential task that should be done regularly to ensure its functionality and longevity. A dirty or rusty spring can cause a malfunction in the firearm and put you at risk. However, cleaning the spring can be challenging, especially if you are not experienced with firearms maintenance.

In this article, we’ll be covering the process of cleaning your magazine spring in an easy-to-follow step-by-step guide, so you can keep your firearm in excellent condition and your shooting experience smooth and hassle-free.

How to Clean a Firearm'S Magazine Spring?


Table of Contents

Understanding The Importance Of Cleaning And Maintaining Your Firearm’S Magazine Spring

Firearm maintenance is an essential aspect of gun ownership and operation. Every component of your firearm should be cleaned and well-maintained to ensure maximum performance, and the magazine spring is no exception. In this post, we will discuss the importance of cleaning and maintaining your firearm’s magazine spring and how it impacts your gun’s performance.

Why Is Cleaning Your Firearm’S Magazine Spring Important?

Cleaning your firearm’s magazine spring is important for several reasons. Over time, the magazine spring can become dirty and corroded, which can negatively impact the reliability and performance of your firearm in the following ways:

  • Misfeeds: Dirty magazine springs can cause a misfeed (failure to load a cartridge) due to the reduced tension and resistance in the spring.
  • Jams: Jams can occur when the magazine spring fails to feed the round fully into the chamber.
  • Malfunctions: Poorly maintained magazine springs can cause the firearm to malfunction or even become unusable.

To avoid these issues, it’s important always to keep your magazine spring clean and well-maintained.

How Does A Clean And Well-Maintained Magazine Spring Improve The Performance Of Your Firearm?

A clean and well-maintained magazine spring can improve the performance of your firearm in several ways:

  • Smooth feeding: A clean and well-maintained magazine spring ensures that the rounds are fed smoothly into the chamber, without any resistance or delays.
  • Reliable feeding: A properly maintained magazine spring ensures the rounds’ reliable and consistent feeding, reducing the chances of malfunctions or misfeeds.
  • Increased service life: Regular cleaning and maintenance of your firearm’s magazine spring help to prolong its service life, saving you time and money spent on repairs or replacement.

What Happens If Your Magazine Spring Is Not Cleaned Properly?

Failure to clean your firearm’s magazine spring properly can have severe consequences, such as:

  • Reduced performance: Poorly maintained magazine springs can reduce your firearm’s accuracy, speed, and reliability.
  • Wear and tear: Over time, a dirty and corroded magazine spring can cause increased wear and tear on your firearm’s other parts.
  • Expensive repairs: A malfunctioning firearm can be costly to repair and may require professional cleaning to get it back to working condition.

To ensure the longevity and excellent performance of your firearm, you should regularly clean and maintain the magazine spring. By doing so, you’ll not only ensure that your firearm operates reliably but also enhance your shooting experience.

Tools And Materials Needed For Cleaning Your Firearm’S Magazine Spring

Cleaning a firearm’s magazine spring can be a daunting task, especially if you are new to firearms. However, it is a crucial aspect of firearm maintenance that ensures the smooth functioning of your firearm. In this section, we will discuss the different tools and materials you will require to clean your firearm’s magazine spring effectively.

An Overview Of The Tools And Materials Needed

Before cleaning your firearm’s magazine spring, you must gather all the necessary tools and materials. These include:

  • Cleaning solvent
  • Cleaning patches
  • Cleaning rod
  • Magazine brush
  • Tweezers or toothpick

Let’s discuss these tools and materials in more detail below.

Choosing The Right Cleaning Solvent

Choosing the right cleaning solvent is crucial when it comes to cleaning your firearm’s magazine spring. You should always use a solvent that is specially designed for firearms. Solvents such as hoppe’s no. 9 or clp (cleaner, lubricant, protectant) are excellent options as they can effectively break down carbon buildup and other debris.

When selecting a cleaning solvent, it is essential to read the label and ensure that it is safe to use on your firearm. Some solvents can cause damage to certain types of firearms, so it is essential to pay attention to the labels and instructions.

Selecting The Right Cleaning Tool For The Job

After choosing the right cleaning solvent, you must select the right cleaning tool for the job. Using the right tool will help you clean your firearm’s magazine spring efficiently. Below are some of the best cleaning tools to use:

  • Cleaning rod: This tool is used to push cleaning patches through the magazine spring channel. It should be long enough to reach the end of the magazine spring, and it should be made of materials that won’t damage your firearm.
  • Magazine brush: A magazine brush is used to remove debris and carbon buildup that may have accumulated inside the magazine. Select a brush that fits the size of your magazine well.
  • Tweezers or toothpick: You may need tweezers or a toothpick to remove any debris that’s stuck inside the spring, especially in hard-to-reach areas.

Cleaning your firearm’s magazine spring is a crucial aspect of firearm maintenance. It ensures the smooth functioning of your firearm and reduces the risk of malfunctions. By using the right tools and materials, you can clean your firearm’s magazine spring efficiently and effectively, keeping your firearm in top condition for years to come.

Step-By-Step Guide To Cleaning Your Firearm’S Magazine Spring

Safety Considerations Before Beginning The Cleaning Process

Before beginning the cleaning process, take the following safety measures:

  • Ensure the firearm is unloaded and the magazine is removed.
  • Place the firearm and all the cleaning equipment on a flat surface.
  • Wear protective gear like eye goggles and gloves to protect yourself from harmful chemicals and cleaning agents.
  • Always refer to the firearm’s manufacturer’s manual for information on how to clean your firearm’s magazine spring.

Disassembling The Magazine Assembly

Disassembling the magazine assembly involves removing the magazine components to clean the magazine spring. Here is a step-by-step guide:

  • Remove the base plate or floor plate from the magazine by depressing the retaining pin with a punch or small screwdriver.
  • Carefully remove the magazine spring and follower from the magazine body.
  • Depress the retaining pin holding the follower and lift it out.
  • Inspect the components as you disassemble them to determine any signs of corrosion, damage, or wear.

Cleaning The Magazine Spring Components

Cleaning the magazine spring components is essential to ensure proper functioning of your firearm. Here’s how you clean the magazine spring components:

  • Soak the magazine spring and other components in a cleaning solution like clp (cleaner, lubricant, and protectant) or gun solvent.
  • Use a nylon brush to scrub the components and remove fouling and debris.
  • Ensure that all components are completely dry before reassembling. You can use a cloth to wipe them dry.
  • Apply a thin coat of oil lubricant to the components before reinstalling them.

Reassembling The Magazine Assembly

Once the components are clean and dry, it’s time to reassemble the magazine assembly correctly. Here is what you need to do:

  • Place the magazine follower back into the magazine tube and align it with the retaining pin.
  • Carefully insert the magazine spring into the magazine.
  • Press the baseplate onto the magazine body until the retaining pin clicks into place.
  • Check the magazine for proper functioning by loading and unloading dummy rounds before using it.

Understanding how to clean a firearm’s magazine spring is vital to keep your firearm functioning smoothly. Always adhere to the manufacturer’s manual and take necessary safety precautions while cleaning. Remember to follow the step-by-step guide to disassemble, clean, and reassemble the magazine assembly correctly.

With a little effort, you can maintain your firearm and ensure its longevity.

Tips For Maintaining Your Firearm’S Magazine Spring

How to clean a firearm’s magazine spring? Tips for maintaining your firearm’s magazine spring

Maintaining your firearm’s magazine spring is an essential aspect of owning a firearm. It ensures that your firearm functions appropriately while imparting longevity to your firearms’ magazine spring. In this blog post, we’re going to explore some tips for maintaining your firearm’s magazine spring.

General Maintenance Tips

Proper maintenance of your firearms’ magazine spring is crucial to ensure that it runs smoothly. Here are some general maintenance tips:

  • Always perform your firearm’s magazine spring cleaning in a clean and well-lit area.
  • Wear protective gear, such as safety glasses and gloves, when cleaning and maintaining your firearm.
  • Use a cleaning solvent specifically designed for firearms while cleaning your firearms’ magazine spring.
  • Use a good-quality gun oil or lubricant to ensure that the spring stays lubricated for a long time.
  • Be meticulous in cleaning your firearm’s magazine spring; ensure that you inspect every part, including the follower, the body, and the spring.

How Often Should You Clean Your Magazine Spring?

As a rule of thumb, it’s best to clean your firearm’s magazine spring after every use. This practice ensures that your firearm’s magazine spring lasts longer and maintains its functionality. However, you should perform a thorough cleaning on your firearm’s magazine spring if it has been in long-term storage, especially if it has been exposed to moisture or dirt.

Common Mistakes To Avoid When Cleaning Your Magazine Spring

Cleaning your firearm’s magazine spring is a straightforward process, but it’s easy to make mistakes. Here are some common mistakes that you should avoid when cleaning your magazine spring:

  • Using the wrong cleaning solvent: Using the wrong cleaning solvent can damage the magazine spring, so it’s essential to use a product that’s designed for firearms.
  • Over-lubricating the spring: It’s crucial to lubricate your firearm’s magazine spring, but too much lubrication can lead to it attracting dirt and debris, which can cause it to malfunction.
  • Not inspecting the spring for damages: Always inspect your firearm’s magazine spring for signs of damage. Damaged or bent springs can cause misfires and other problems.
  • Disassembling your magazine incorrectly: It’s essential to disassemble your firearm’s magazine correctly. Incorrectly disassembling can lead to damage or misalignment of the spring or other magazine components.

Maintaining your firearm’s magazine spring will contribute to its longevity while keeping it functioning efficiently. When cleaning your firearm’s magazine spring, follow the guidelines listed above and avoid the common mistakes explained. With proper cleaning and maintenance, your firearm’s magazine spring will last for years to come.

Alternative Cleaning Techniques For Your Firearm’S Magazine Spring

Firearm enthusiasts know that the key to ensuring their weapon performs well is proper maintenance, including regular cleaning. One important part of keeping your firearm in top condition is cleaning the magazine spring. However, traditional cleaning methods may not be effective or practical in certain situations.

Here are some alternative cleaning techniques for your firearm’s magazine spring.

Alternate Cleaning Methods For A Magazine Spring

Using Compressed Air

If you have a compressed air canister on hand, using it to blow out debris and dust from your magazine spring is a quick and easy solution. Here’s how:

  • Point the nozzle of the compressed air canister into the magazine well.
  • Press the trigger to start the flow of compressed air.
  • Squeeze the trigger several times to ensure all debris is removed from the magazine spring.

Using A Bore Snake

A bore snake is a handy tool for cleaning your firearm’s barrel, but it can also be effective in cleaning the magazine spring. Here’s how to use it:

  • Insert the bore snake from the bottom of the magazine.
  • Pull the bore snake through the magazine, ensuring that the bristles clean the spring.
  • Repeat the process until the magazine spring is clean.

Using An Ultrasonic Cleaner

An ultrasonic cleaner can be a practical solution for those with multiple firearms or for those who clean their firearms more frequently. Here’s how to use it:

  • Disassemble the magazine.
  • Place the spring in the ultrasonic cleaner.
  • Turn on the ultrasonic cleaner for the recommended amount of time.
  • Remove the spring from the cleaner and wipe it down with a clean cloth.

Pros And Cons Of Alternative Cleaning Methods

Using Compressed Air


  • Quick and easy
  • Effective in removing debris


  • May not remove all buildup from the spring
  • Compressed air canister may not be readily available

Using A Bore Snake


  • Effective in removing debris
  • Easy to use


  • May not remove all buildup from the spring
  • Not suitable for deep cleaning

Using An Ultrasonic Cleaner


  • Thorough cleaning
  • Effective in removing buildup


  • Expensive investment
  • May not be practical for infrequent use

By trying out these alternative cleaning techniques, you can ensure that your firearm’s magazine spring stays free from debris and functioning at its best.

Frequently Asked Questions For How To Clean A Firearm’S Magazine Spring?

How Often Should I Clean My Magazine Spring?

It is recommended that you clean your magazine spring every 1,000 rounds or whenever you notice a decrease in feeding reliability. Keeping the spring clean will help ensure proper functioning and longevity.

What Should I Use To Clean My Magazine Spring?

You can clean your magazine spring with a soft-bristled brush and a gun cleaning solvent. Be sure to follow the manufacturer’s instructions for the specific cleaning solvent you are using.

How Do I Clean My Magazine Spring?

Remove the spring from the magazine and use a soft-bristled brush to remove any debris or dirt. Next, apply a gun cleaning solvent to the spring and allow it to soak for a few minutes. Wipe the spring clean with a cloth and reassemble the magazine.

Can I Lubricate My Magazine Spring?

It is generally not recommended to lubricate your magazine spring as it can attract dirt and debris and potentially lead to feeding issues. However, if you decide to lubricate your spring, only use a very small amount of gun oil to avoid over-lubrication.

What Happens If I Don’T Clean My Magazine Spring?

If you do not clean your magazine spring, dirt and debris can build up, resulting in feeding malfunctions and potentially damaging the spring over time. Cleaning your magazine spring regularly helps ensure proper functioning and increases longevity.


Maintaining the magazine spring of your firearm is an important aspect of gun care, as it directly affects the performance of your firearm. In order to keep your firearm functioning effectively and to avoid any malfunctions, it is crucial to regularly clean the magazine spring.

By following the cleaning methods discussed in this article, you will be able to ensure greater accuracy, reliability and longevity for your firearm. With the right set of tools, a bit of patience and attention to detail, you can easily keep your magazine spring in top-notch condition.

Remember that a well-maintained firearm always delivers the best performance, making it a reliable tool for defense and shooting. So, make sure to devote some of your time to this essential task and keep your firearm functioning flawlessly. Happy shooting!






Leave a Reply

Your email address will not be published. Required fields are marked *