How to Clean a Firearm’S Magazine Spring?

To clean a firearm’s magazine spring, disassemble the magazine and remove any excess debris with a nylon brush or cloth. Soak the spring in a solvent and dry it thoroughly before reassembling the magazine.

Firearms enthusiasts know the importance of properly maintaining their equipment. This includes taking the time to regularly clean and inspect all parts of their firearms. One critical part to pay attention to is the magazine spring. The magazine spring is a crucial component that serves to push rounds up into the firearm’s chamber.

It is essential to keep the spring clean to ensure it functions correctly and avoid malfunctions that could put users in danger. In this article, we will go over the process of cleaning a firearm’s magazine spring to keep it in top working order.

How to Clean a Firearm'S Magazine Spring?


Understanding The Firearm Magazine Spring

A firearm magazine spring is an essential part of the firearm’s magazine assembly. Without a spring, the magazine cannot function properly. The magazine spring applies pressure to the ammunition inside the magazine, allowing for a smooth feeding of rounds into the firearm’s chamber.

The spring is typically made of high-quality steel materials that can withstand constant use.

Description Of What The Magazine Spring Is And Its Function

The magazine spring is a coiled wire that keeps the magazine’s ammunition in place. The spring pushes the bullets towards the top of the magazine to feed into the firearm’s chamber, allowing for continuous firing until the magazine is emptied.

The magazine spring is a crucial component that ensures the magazine functions properly and reliably.

Importance Of Keeping The Magazine Spring Clean

Keeping your firearm magazine spring clean is vital for ensuring that your firearm functions properly. Dirt and debris can accumulate on the spring, causing it to lose tension and fail to feed ammunition properly. A clean magazine spring will ensure that the magazine feeds ammunition smoothly and correctly, leading to an improved shooting experience.

Here are some tips to keep your magazine spring clean:

  • Use a soft-bristled brush to remove any dirt or debris from the spring.
  • Wipe the spring with a lightly oiled cloth to prevent corrosion.
  • Avoid applying too much oil to the spring, as it can attract dirt and debris.
  • Check the spring regularly for signs of damage or wear. It is essential to replace the spring if it shows any signs of wear or damage.

Understanding the firearm magazine spring is crucial for maintaining your firearm. Keeping your magazine spring clean and well-maintained will ensure that your firearm functions correctly and reliably. Ensure that you keep a check on your firearm magazine spring regularly.

Tools And Materials You Will Need

Cleaning a firearm’s magazine spring is an essential step in maintaining your firearm’s functionality and preventing potential malfunctions. Keeping the magazine spring clean ensures that the bullets load correctly, feeding smoothly through the gun’s chamber. It is imperative to use the right tools and materials to avoid damaging your firearm.

Below is a list of necessary tools and materials you’ll need for cleaning your firearm’s magazine spring.

List Of Tools And Materials Needed To Clean The Magazine Spring

To clean your firearm’s magazine spring, you’ll need the following tools and materials:

  • Gun cleaning solvent
  • Cleaning brush
  • Q-tips
  • Microfiber cloth
  • Cleaning rod

Importance Of Using The Right Tools And Materials

Using the appropriate tools and materials is essential when it comes to maintaining your firearm. Each tool serves a specific purpose, and using the wrong one may cause damage to your firearm. Using improper chemicals or solvents on your firearm may cause damage to the gun’s finish or impact the magazine spring’s function.

Here are some critical reasons why you need to use the correct tools and materials for cleaning your firearm’s magazine spring:

  • Prevents damage to the magazine spring.
  • Reduces the potential for malfunctions or misfires.
  • Ensures the longevity of your firearm.
  • Keeps your firearm looking new.
  • Increases safety while handling and shooting your firearm.

It is crucial to note that the tools and materials listed above are only the bare minimum. Depending on the type of firearm you have, you may need additional tools to fully clean your magazine spring. Ensure you always consult your firearm manual or an expert in the field to determine precisely what tools and materials you’ll need to keep your firearm in optimal condition.

Step-By-Step Guide To Cleaning The Magazine Spring

Cleaning a firearm’s magazine spring is an essential aspect of firearms maintenance. Magazines are the most critical component of a firearm, and malfunctioning magazines can cause severe problems while using a firearm. Cleaning the magazine spring regularly ensures the magazine operates smoothly, and the firearm can function correctly.

Step 1: Unloading And Disassembling The Firearm

Before cleaning any firearm component, it is essential to ensure it is unloaded. Follow the firearm manufacturer’s instructions to disassemble the firearm correctly.

Step 2: Removing The Magazine From The Firearm

Once the firearm is unloaded and disassembled, remove the magazine from the firearm by pressing the magazine release button.

Step 3: Dismantling The Magazine

To dismantle the magazine, carefully separate the base plate from the magazine body. The magazine spring and follower will also come out with the base plate.

Step 4: Cleaning The Magazine Components

Clean the magazine components using a soft-bristled brush and a cleaning solvent. Make sure to remove any dirt, debris, or residues that may have accumulated. Wipe all the components dry using a dry cloth. Ensure that the magazine body is thoroughly cleansed from inside and outside.

Step 5: Cleaning The Magazine Spring

Take the magazine spring and clean it by running a soft, clean cloth through its coils. If the magazine spring is too dirty, use a cleaning solution and a brush to clean it. Ensure that the magazine spring is not damaged or bent while cleaning.

Step 6: Reassembling The Magazine

After all the components are cleaned and completely dry, reassemble the magazine by putting the spring and the follower back into the magazine body. Reattach the base plate by sliding it back onto the magazine body. Make sure the magazine components are correctly assembled, and the magazine is functional.

Step 7: Reinserting The Magazine Into The Firearm

Once the magazine is assembled, reinsert it into the firearm according to the firearm manufacturer’s instructions. Make sure the magazine clicks into place.

Step 8: Function Testing The Firearm

It is essential to conduct a function check to ensure the firearm is correctly assembled and operates correctly. Conduct the function check according to the firearm manufacturer’s instructions.

Following these simple steps will ensure that your firearm’s magazine spring is always properly cleaned and maintained, which will reduce the chance of malfunctions when using your firearm. Regular firearm maintenance is crucial for your firearm’s longevity, safety, and reliability.

Tips And Tricks For Cleaning The Magazine Spring

Cleaning a firearm’s magazine spring is an essential part of gun maintenance that should never be overlooked. In particular, the spring of a magazine must be correctly cleaned to ensure that it functions correctly and reliably.

Timeframe For Cleaning The Magazine Spring

If you use your firearm regularly or carry it on a regular basis, it’s necessary to clean the magazine spring after every 500 to 1,000 rounds. However, it is still essential to inspect and clean the spring and the rest of the magazine at every opportunity.

How Often Should The Magazine Spring Be Cleaned?

Regularly cleaning the magazine spring prevents malfunctions, minimizes the chances of misfiring, and ensures that the gun operates correctly. Cleaning of the magazine spring should be part of your regular gun maintenance routine, and it should be cleaned once every 3 to 6 months in dry seasons and 1 to 2 months in humid climates.

However, depending on how often you use your firearm, you may need to clean the magazine spring more frequently.

When cleaning the magazine spring, you must keep a few precautions in mind to ensure that you don’t damage it.

Precautions To Keep In Mind While Cleaning The Magazine Spring

  • Always use a designated firearm cleaner and lubricant for cleaning the magazine spring.
  • Remember to remove the slide and spring from the gun before cleaning the magazine spring.
  • Use bore brushes and solvents to clean the spring thoroughly, but never use oil or grease to clean it.
  • Inspect the spring for any signs of wear and tear, such as rusted or corroded areas, and replace it if you find any visible damage.
  • Finally, reassemble the spring and test its elasticity to ensure that it’s functioning correctly.

By regularly cleaning and maintaining your firearm’s magazine spring, you can improve its longevity and performance, ensuring it provides you with reliable service when you need it.

Frequently Asked Questions On How To Clean A Firearm’S Magazine Spring?

How Often Should I Clean My Firearm’S Magazine Spring?

You should clean your firearm’s magazine spring after every range session or every three months, whichever comes first. It’s crucial to keep your magazine spring clean and well-maintained to ensure proper functioning of your firearm.

What’S The Best Way To Clean My Firearm’S Magazine Spring?

The best way to clean your firearm’s magazine spring is by using a clean cloth and non-corrosive solvent. Ensure that you remove any dust, dirt, or grime from the magazine spring to keep it in excellent condition.

Can I Use Wd-40 To Clean My Firearm’S Magazine Spring?

No, you shouldn’t use wd-40 to clean your firearm’s magazine spring. Wd-40 is a lubricant and not a cleaner, and it could attract dirt and debris, making your magazine spring more prone to malfunction. Use only non-corrosive solvent to clean your magazine spring.

What Happens If I Don’T Clean My Firearm’S Magazine Spring?

If you don’t clean your firearm’s magazine spring, dirt and grime can accumulate inside, which could lead to feeding problems or jams. Dirty magazine springs are more prone to malfunctioning and could cause severe safety hazards.

Should I Oil My Firearm’S Magazine Spring After Cleaning It?

No, you don’t need to oil your firearm’s magazine spring after cleaning it. The magazine spring should remain dry to avoid attracting dirt and debris, which could lead to malfunctioning or jamming. Ensure that you keep your magazine spring clean and dry all the time.


Proper cleaning and maintenance of a firearm’s magazine spring is crucial for ensuring smooth and reliable performance. By following the steps outlined in this guide, you can take the necessary steps to keep your firearm’s magazine spring in optimal condition.

It is important to remember that regular cleaning and inspection of all parts of your firearm is necessary to keep it functioning properly and to ensure its longevity. Neglecting even one component of your firearm can lead to potential safety hazards and a decrease in performance.

So, it is best to be proactive and meticulous when it comes to maintaining your firearm. We hope that this guide has been helpful and informative and that you continue to prioritize the proper care and maintenance of your firearm.






Leave a Reply

Your email address will not be published. Required fields are marked *