How to Clean a Firearm’S Magazine Well?

To clean a firearm’s magazine well, first make sure the magazine is removed. Then use a cleaning brush to scrub the well and remove any debris.

Cleaning your firearm’s magazine well is an essential part of firearm maintenance to ensure proper functioning and performance. A dirty or clogged magazine well can cause malfunctions, misfeeds, and potentially dangerous situations. Cleaning the magazine well is a straightforward process that should be done regularly as part of your overall cleaning routine for your firearm.

In this article, we will provide step-by-step instructions on how to clean your firearm’s magazine well, including the tools and materials needed, and tips to make the process more effective and efficient.

How to Clean a Firearm'S Magazine Well?

Credit: hurleymarine.com

Understanding Your Firearm’S Magazine Well

If you’re a firearm owner, it’s essential to understand how to clean your gun properly. One of the critical components of your firearm is the magazine well. Therefore, it is crucial to know about its various components and types.

Overview Of The Magazine Well Components

The magazine well is the area in your firearm where the magazine is inserted. It consists of several components that you should familiarize yourself with before beginning cleaning.

  • Magazine release button: This is the button or lever that releases the magazine from the firearm.
  • Magazine well: The area where the magazine is inserted into the firearm.
  • Magazine follower: This is the part of the magazine that pushes the bullets up into the chamber.
  • Detent: This is a small metal ball that provides tension to the magazine and holds it in place.
  • Spring: The spring provides tension to the magazine and is responsible for feeding bullets into the chamber.

Different Types Of Magazine Wells And Their Maintenance Requirements

There are different types of magazine wells on firearms, and each has different maintenance requirements:

  • Closed magazine wells: Closed magazine wells are sealed off from the rest of the firearm and require less maintenance than open wells. However, if dirt or debris gets inside, it can cause malfunctions.
  • Open magazine wells: Open magazine wells are exposed to the elements and require more maintenance than closed wells. Dirt and debris can easily find its way into the open well if not cleaned regularly.
  • Polymer magazine wells: Polymer magazine wells are prevalent in newer firearms. These magazine wells require minimal maintenance because they are resistant to dirt and debris.

Regardless of the type of magazine well, it is essential to keep it clean to ensure the proper functioning of your firearm. Follow these steps to clean your magazine well thoroughly:

  • Clear the firearm: Make sure that your firearm is unloaded before beginning cleaning.
  • Disassemble the magazine: Take apart the magazine and clean each part individually.
  • Use a cleaning solution: Apply a gun cleaning solution liberally to a cleaning brush and scrub the magazine well until clean.
  • Dry: Wipe off excess cleaning solution from the magazine well and dry it thoroughly.

Understanding your firearm’s magazine well is essential in maintaining the safety and functionality of your firearm. Keep your magazine well clean, and your firearm will function correctly.

Preparing For Cleaning The Magazine Well

Before you begin the process of cleaning your firearm’s magazine well, there are a few important steps you should take to ensure both your safety and the proper maintenance of your firearm. The following are some things you should keep in mind:

Tools Needed

Having the proper tools at your disposal is crucial for cleaning your firearm’s magazine well. Here are some of the tools you’ll need:

  • Cleaning rod: This will help you reach into the tight spaces of the magazine well
  • Cleaning solvent: This will remove any dirt or debris from the well
  • Cleaning brush: Use this to scrub the inside of the well thoroughly
  • Microfiber cloth: Use this to dry and polish the well after cleaning

Safety Precautions To Take Before Cleaning

Whenever you handle a firearm, safety should be your top priority. Take the following precautions before you begin cleaning your magazine well:

  • Make sure your firearm is unloaded: Remove the magazine and slide the bolt back to ensure it’s empty. Double-check to make sure there is no ammunition in the area.
  • Wear eye protection: This is important, as cleaning solvents can be hazardous if they come into contact with your eyes.
  • Work in a well-ventilated area: This will help prevent the inhalation of any harmful chemicals.

Removing Magazine And Ammunition

Before cleaning the magazine well, it’s important to remove both the magazine and any ammunition. This is a crucial step that will prevent accidents and injuries. Follow these steps:

  • Remove the magazine: Depress the magazine release button to remove the magazine from the gun.
  • Remove any ammunition: Double-check to make sure there are no rounds in the chamber or magazine well. Store your ammunition in a safe place while you clean your firearm.

By following these steps, you’re well on your way to properly cleaning your firearm’s magazine well. Remember, safety comes first, so always make sure to double-check that your firearm is unloaded before proceeding with any cleaning.


Step-By-Step Guide To Cleaning The Magazine Well

Firearms require proper maintenance and care to function correctly and safely. Cleaning the magazine well is a crucial step in ensuring the smooth operation of your firearm. Here is a step-by-step guide on how to clean your firearm’s magazine well.

Disassembling The Magazine Well And Its Components

Before cleaning your firearm’s magazine well, you need to disassemble it to access its internal components. Here are the steps to follow:

  • Unload the firearm and remove the magazine.
  • Disassemble the firearm according to the manufacturer’s instructions.
  • Locate the magazine well and remove its internal components, such as the spring and follower.

Applying Solvent To The Magazine Well And Scrubbing The Surfaces

Once you have disassembled the magazine well, you need to apply solvent to its surfaces to clean off any carbon buildup, grime, or other deposits. Here’s how to do it:

  • Apply a gun-specific solvent to the magazine well and its components.
  • Use a nylon brush to scrub the surfaces of the magazine well.
  • Make sure to scrub the corners and edges where dirt and debris tend to accumulate.

Removing Residues And Deposits From The Magazine Well

After scrubbing the surfaces with a solvent, you need to remove any remaining residues, debris, or deposits from the magazine well. Here are the steps to follow:

  • Wipe the magazine well and its components with a clean cloth, removing any debris or residue.
  • Use compressed air to blow out any remaining residue or debris
  • Inspect the magazine well to ensure it is thoroughly clean and free of deposits.

Cleaning And Lubricating Magazine Components

Now that the magazine well is clean, you need to clean and lubricate the magazine components. Here are the steps to follow:

  • Wipe the magazine components with a clean cloth to remove any dirt and debris.
  • Apply a light coat of gun oil to the magazine spring and follower.
  • Reassemble the magazine, making sure the components fit together correctly.

Reassembling The Magazine Well

Once you have cleaned and lubricated the magazine components, it’s time to reassemble the magazine well. Here are the steps to follow:

  • Insert the magazine spring and follower into the magazine well.
  • Replace any other internal components of the magazine well.
  • Reassemble the firearm according to the manufacturer’s instructions.

Cleaning the magazine well is an essential part of firearm maintenance that will help keep it working smoothly and safely. By following these simple steps, you can ensure that your firearm’s magazine well stays clean and operating correctly for years to come.

Tips For Maintaining The Firearm’S Magazine Well

Keeping your firearm’s magazine well clean and functioning properly is crucial for safe and efficient shooting. Here are some essential tips for maintaining the firearm’s magazine well.

Frequency Of Cleaning

Cleaning the firearm’s magazine well should be a regular part of your gun maintenance routine. Here’s how often you should clean it:

  • After each shooting session
  • When you notice malfunctions
  • When the magazine does not drop free or seat properly

Recommended Products And Tools For Better Maintenance

Using the right products and tools can make cleaning your firearm’s magazine well an easier and more efficient process. Here’s what you’ll need:

  • A nylon brush or toothbrush
  • A cleaning rag
  • A solvent
  • A lubricant
  • A few clean cotton swabs

Common Mistakes To Avoid During The Cleaning Process

While cleaning the firearm’s magazine well, be mindful of these common mistakes to avoid damaging your gun:

  • Using harsh solvents that may damage metal parts
  • Over lubricating the magazine well, which may cause malfunctions
  • Using a stiff bristle brush, which may scratch the surface of the magazine well
  • Using an abrasive cloth to wipe down the magazine well

Maintaining your firearm’s magazine well will not only extend the life of your gun but will also ensure safe and optimal performance. By following these tips, you can keep your firearm in top condition.

Frequently Asked Questions On How To Clean A Firearm’S Magazine Well?

How Often Should I Clean My Firearm’S Magazine Well?

It is recommended to clean your firearm’s magazine well every time you clean your gun. This ensures proper functioning and eliminates any buildup of dirt or debris.

What Tools Do I Need To Clean My Firearm’S Magazine Well?

You will need a cleaning rod, a bore brush, a cleaning solvent, and a cleaning patch. It is also recommended to have a specialized magazine cleaning brush to get into all the crevices of the magazine well.

Can I Use Any Type Of Cleaning Solvent On My Firearm’S Magazine Well?

It is important to use a cleaning solvent that is specifically designed for firearms. Harsh chemicals or solvents not meant for firearms can damage the finish and materials of your firearm.

How Do I Properly Clean My Firearm’S Magazine Well?

First, disassemble your firearm and remove the magazine. Next, use a cleaning brush and solvent to thoroughly scrub the inside and outside of the magazine well. Wipe it clean with a dry patch or cloth before reassembling your firearm.

What Should I Do If I Notice Rust Or Corrosion In My Firearm’S Magazine Well?

If you notice rust or corrosion in your firearm’s magazine well, it is important to address the issue quickly to prevent further damage. Scrub the affected area with a brass brush and cleaning solvent, and then apply a rust inhibitor to prevent future rust and corrosion.

Conclusion

As you can see, cleaning a firearm’s magazine well is not as complicated as it seems. By following the steps we have outlined above, you can ensure that your firearm is always in top condition, ready for use whenever you need it.

Remember to always take care when handling firearms, and to follow all safety guidelines at all times. With a little bit of practice, you will find that cleaning your firearm’s magazine well becomes second nature. Regular maintenance of your firearm is crucial for ensuring its longevity, reliability and safety.

So, take the time to properly maintain your firearm and it will reward you with dependable service for years to come. Thanks for reading, and happy shooting!


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *